sliding doors, model         IRON ST

The sliding door, model SLIDING DOOR IRON ST, with bottom track on floor, is realized with a supporting frame made of steel tubular profile properly designed. This structure is completed with modular panels (L . mm. 1000 each one), which are micro-ribbed sandwich panels with a total thickness of 50mm., made of steel sheet pre-varnished both side on White Grey. Inside these panels have a CLASS 1 self-extinguishing insulating material, and they are groove-and-tongue joint. They are then placed close to the structure and they are stuck laterally by pressed steel sheets.

 

 

To protect the door wings, to avoid the surface to become scratched, a self-adhesive protective film is stuck on and has to be removed by the installers at the moment of installation.
Panels are joint in their height by black aluminium profiles with the shape as “H”, and panels are assembled on top and bottom by other black aluminium profiles with the shape as “C”.
The upper track is made of pressed steel, and it is equipped with brackets, for fixing on masonry, and also sliding bearings, to be fixed on the door wing top part. The sliding on floor is assured by supporting wheels, made of sealed chamber double bearing, and inserted into the bottom part of the door wing. Bottom closure is possible thanks to a nylon brush.
The bottom track (to bury on floor in charge of client), can be chosen between different models of ours depending from the wall hole characteristics, and we supply it with installations instructions to allow the client to make the perfect installation, this way also assuring the right distance from masonry.
The door perfect closure is guaranteed by espagnolette bolts, installed inside and equipped with bars that close on top and bottom. These bars have a strengthened extremity and a PVC device that allows the bar to slide, all made of black varnished galvanized steel.
Rubber seals for lateral closure are made of black natural EPDM, which is also antiager. These rubber seals allow a perfect sealing compound.
Door can be delivered as manual, predisposed for motor unit, or with a motor drive. We guarantee our doors functioning with a temperature between -30°C and + 70°C.

Available colours:

ral-en

 

Other models                            thermal transmittance                        Optional

 

iron

    steel wings with out of catalogue colours

    aluminium wings with thickness of 20/10

    wings made of stainless steel sheet

    pedestrian door with lock or anti-panic handle

    glass potholes

    espagnolette bolts with external key

    motor unit

    broken wing